aaaa

Otomatik Kepenk

AUTOMATIC ROLLING SHUTTERS

HRS130  has strengthed with its curved shape and resistant to explosive flammable materials,against bad weather conditions such as wind, snow and rain. It is ideal for spaces with wide openings.It has single wall.It is made of galvanized steel material with a wall thickness of 0.80-1.00-1.20 mm according to the dimensions of the door.

The HRS 120 has flat single wall and is produced from galvanized steel with a wall thickness of 0,80 mm according to the dimensions of the door. it is a useful and has aesthetic appearance panel. In the assembly type where reverse winding is obligatory, the back side of the panel can be used as the front side. With window and micro-hole variants, it responds to different usage alternatives.Micro-perforated panel is ideal for areas where light and air circulation is compulsory. In addition, the micro-perforated panel does not distort the aesthetic appearance of the display cases due to its transparent property.

HRS 110  produced by double wall from 2 different galvanized steel profiles each with a wall thickness of 0.60-0.80 mm. Inside it has rock wool isolation. Rigid, it is resistant to strong winds, but also increases the energy by keep heat.It is used in central heating-cooled buildings, where sound insulation is important.

HRS 80 special shaped single walled, galvanized steel is produced with a wall thickness of 0.80-1.2 mm according to the size of the door. It is has strength with its curved structure. It can be used for all types of engines and pipes.According to the other panels, the winding is small and takes up little space.

BOTTOM PROFILE

Panel mounted on the door skirts and used at the door, even if the thickness of the meat is thin, these profiles produced from ST 37 galvanized steel with a meat thickness of at least 1.20 mm and above help the door to be more resistant to wind.The special rubber mounted on these profiles compensate for the roughness between the door and the floor, providing a smooth stop and sealing.

GUIDE PROFILES

The type of corrugated guide to be used differs depending on the installation location and the type of panel to be selected. The special brush and rubber wicket, which is mounted in the groove, provides a comfortable and quiet operation by minimizing the friction between the panel and the work guide.

NET TYPE OF DOOR

F16 inner tube; Electro-galvanized pipe with 1.5 mm wall thickness. Outer pipe is manufactured from anodized aluminum material. The connection plates are resistanced with 4 mm thickness of heat-treated aluminum. Stainless appearance is not deformed because of  the properties of the materials.It has stylish looking model and also can be used behind and in front of your showcase

F13 inner pipe; Electro-galvanized pipe with 1.5 mm wall thickness. Outer pipe manufactured from anodized aluminum material. The connection plates are resistanced with 3 mm thickness of heat-treated aluminum. It is a new model alternative to old classical manuel shutters with modern and stylish image. Stainless appearance is not deformed because of  the properties of the materials.It does not need  to paint , so it is a economical and stylish shutter.

TOP