Endüstriyel Yükleme Sistemleri

HINGE LIP  DOCK LEVELLER

1-Ramp platform features

Platform measurements are 2000x2500mm.

Platform material is high quality steel 6-7mm wall thickness

The surface of the sheet is patterned and prevents tire slip.

The platform has 120-bit NPI support.

The ramp is blue in color and yellow stripes on its sides. Bold before ramp

Epoxy lining is painted with epoxy paint after being thrown.

There is a security bar for maintenance.

Raising and lowering the platform is adjustable.

The platform shaft lifting piston shaft thickness is minimum 50mm.

There is a hose explosion valve on the piston which lifts the platform

2-Ramp lip features

The hinged tongue length is minimum 400mm.

The sheet metal used on the hinged tongue bottom is 12-13mm thick, the surface of the sheet is patterned preventing tire slippage.

The tip of the hinged tongue is angled situation to facilitate the forklift exit.

Hinged spindle used piston shaft at least 30mm thick 140mm stroke

3-Hydraulic system

There is a 380V 50Hz motor.

The engine power is at least 1,1 Kw.

Parts used in hydraulic system (pump, valve, valve etc.)

24V dc valve is used in the hydraulic system.

Working temperature is -20 +70 ° C minimum.

The control panel has a thermal switch fuse.

It is suitable for IP 55 protection class with control panel.

4-General characteristics of ramp The tongue can be closed with a separate button to prevent time loss when the ramp is in the air.The maximum moving load to be passed over the ramp can be manufactured as 6000 kg, 9000 kg, 12000 kg. Rubber pads are installed on both sides of the ramp. The ramp is guaranteed for 2 years against all kinds of fabrication faults. 10 years spare part possession gurantee for ramps.

—————————————————————————————————

TELESCOPIC LIP DOCK LEVELLER

Telescopic ramp; it is very useful with the adaptation of the hydraulic equipment and design which does not occupy any space by being buried in the concrete and especially the ramp which is longer for the cases where the loading of the hinged ramps is not enough in the container loads.

The 12 / 13mm thick hydraulic tongue, manufactured from 600mm to 1000mm, provides a complete solution for container loads

Increases business efficiency by shortening load time

High range of motion ensures adapts to every vehicle with the loading and unloading

Thanks to hydraulic and electrical compliance allows easy use

Fabricated teardrop pattern that prevents the forklift from slipping through sheet

Automatically adjusts its level according to vehicle height

Provides safe operation by stopping at the desired position

Yellow black safety tape that show its working

Exist 100x100x300 mm 2 rubber crash pads

Side protective sheets preventing foot jam

600 mm in length high strengthly 12/13 teardrop pattern lip

Hose bursting valve that locks the system in sudden situations

Safety valve to prevent engine overload in maximum lift

DOCK SHELTERS

The loading bay provides a partial isolation between the loading area and the transport vehicle against such factors as dust and rain.

Provides great convenience during loading and unloading. It saves heat and energy because it distinguishes the interior and the exterior.

INFLATABLE SHELTERS

Loading-unloading products Inflatable shelters provide optimum insulation by combining many possible applications. WI-Series inflatable shelters have inflatable side and upper docking cushions to provide virtually airtight sealing with the vehicle.

In this way, the loading and unloading equipments are ideal for sealing against inflow shelters, temperature controlled warehouses and distribution centers against summer temperature, winter cold, circulation, dust and insects