Industrial sectional doors add momentum and changing with ergonomic and innovative ideas to sector. The products are sent packaged to our customer ready for install. Panel and hardware accessories are prepared according to the order given. Industrial doors can be produced with windows and service doors according to the usage places and purposes of the doors.
TYPE OF LIFT
Full vertical lift
PANELS –ITALPANNELL / ITALY
Inside and outside are sandwich panel with 0,50 mm thickness galvanized coated painted sheet and 43,3 kg / m3 polyurethane insulation material. The foam used is CFCs Free and B2 non-flammable. The panel has a size of thickness 40 mm, alternatively 500 mm in height and 610 mm panel available to each other.
Panels are designed using a design that protect finger jamming, also called “finger-protection” (EN12604). To provide insulation at the connection area of the panels, specially designed panels are equipped with heat bridge gasket called “Thermal Bridge” which are installed in the production phase. These seals provide maximum efficiency in insulation. Wind resistance 90 km / h. To increase wind resistance, wind bars made of goddamn galvanized steel sheet larger than 5500mm sizes are used.
Inner and outer surfaces of the panels are embossed and the strength is increased with transverse ribs. Stardart panel color RAL 9010 and similar with fabrication polyester paint has been manufactured. Polyurethane which is used as inner filling material provides heat and sound insulation at high level and it does not pollute the environment with its first class nature friendly structure due to being water based.
Panel heights 610 mm – 500 mm
Panel weight 10,5 Kg / m2
Panel thickness 40 mm
Mounted thickness 43 mm
Polyurethane density 43.3 kg / m3
Polyurethane feature CFC Free – B2
Inner sheet thickness 0,5 mm + – 0,010 mm
Outside sheet thickness 0,5 mm + -0,010 mm
Heat insulation value K = 1.51 w / m2K
Sound insulation value RW = 26 dB
Sectional doors are a common type of garage door found in both commercial and residential structures.
Sectional doors can also be called swing doors and are most commonly used as vehicle doors. They are large doors, usually about 10 feet wide and over six feet tall, with doors fitted at one end and sliding doors fitted on each side of the door.
Sectional garage doors are normally a long, large sectional door on a commercial garage which usually opens by an air-lift or by mechanical power.
Commercial garage doors are often large enough to accommodate several vehicles and other bigger vehicles.
Sectional garage doors can be manufactured in a single panel that tilts up and backwards along the garage roof. These are normally made from a single piece of material such as vinyl, fiberglass or metal and so require no cutting or drilling.
They are also easy to install because they have a locking mechanism installed in each section and are designed to roll into place.
A single-panel Sectional door is made from either wood or metal and so requires no cutting or drilling.
It is ideal for small garages in areas where there is little need for insulation because such a small space is normally not required for insulation.
Sectional doors require insulation because they are intended for opening into a room. The best material for a Sectional door would be fiberglass because it is very strong and durable, especially if the door is used for a car port.
For this reason, a Sectional door should be insulated, or the entire system could come apart and become damaged. Insulation is not as expensive as other types of doors and can easily be added to Sectional doors, however care should be taken that you do not install too much insulation so the door does not break.
Sectional Garage Doors Price
The Sectional garage doors price is certainly much lower than what you will pay for a normal door; but, when you get a Sectional door made by a top-rated factory direct manufacturer, you can also count on having a durable and long-lasting door.
You can save big money by shopping online and getting the best possible deal. These doors will be delivered directly to your home, usually in a wooden crate, and installation takes just a few hours, even for do-it-yourselfers.
If you’re not very sure about the kind of door to purchase, then read on for tips that will help you make the right decision.